To find the latest driver for your computer we recommend running our Free Driver Scan. TI CC2540 USB CDC Serial Port (COM3) - Driver Download. Vendor: Texas Instruments. With CC2540 Read 20389 times previous topic. To find the latest driver for your computer we recommend running our Free Driver Scan. Ti Cc2540 Low Power Rf To Usb Cdc Serial Port Com4 Driver for Windows 7 32 bit, Windows 7 64 bit, Windows 10, 8, XP. Please note the assigned COM port, which is necessary to configure BTool in next step. I know china is playing lottery. The device appear to work: 435.857949 usb 1-1: new full-speed USB device number 5 using xhcihcd 436.001823 usb 1-1: New USB device found, idVendor=0451, idProduct=16a8 436.001828 usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 436.001831 usb 1-1: Product: TI CC2531 USB CDC 436.001834 usb 1-1: Manufacturer: Texas Instruments.
If you are attempting to use an Arduino Nano on a Windows machine and having no luck finding drivers automatically, chances are it is due to a counterfeit FTDI chip which unfortunately does not work with the automatic driver finding functionality in Windows.
Usb Cc2540 Hid
Thankfully, there is a solution if you are running into this problem! Start off by downloading the drivers from the official FTDI site via http://www.ftdichip.com/Drivers/CDM/CDM%20v2.12.00%20WHQL%20Certified.zip (a mirror can be found Here, in case the official link dies in the future).
Ti Cc2540
Once downloaded, unzip the archive and then head to the device manager (Control Panel > Administrative Tools > Computer Management > Device Manager), you should see a device with a yellow exclamation mark next to it labelled “FT232R USB UART”, or possibly a slight variation if using a different FTDI chip. Right click this entry and click Update Driver Software....
On the next prompt, choose the option labelled “Browse my computer for driver software”, and on the next prompt choose “Let me pick from a list of device drivers on my computer”. You will now be presented with a list of device driver types. Highlight USB Serial Converter and click the button labelled “Have Disk…”
You will now be presented with an open file prompt, click browse and select the file called ftdibus.inf that is in the root folder of the archive we extracted earlier and confirm all the open prompts to install the driver.
Now that is done, you will see a new device with a yellow exclamation mark next to it, labelled “USB Serial Port”. Follow the same steps as we did for the FT232R USB UART device, but this time, when choosing the device driver, select USB Serial Port instead and click the Have Disk... button:
Cc2540 Driver Github Link
This time, the driver file you need to select is the ftdiport.inf file that is located in the same root folder of the archive that we used previously. Once again, confirm all the open windows and the driver installation will be complete.
Cc2540 Driver Github Command
Now when you load up the Arduino IDE you should see it select the correct COM port and you should now be able to upload sketches to your Arduino Nano.